Serial Wombat Arduino Library
|
This is the complete list of members for SerialWombatUART, including all inherited members.
_baudMarker | SerialWombatUART | protected |
_pin | SerialWombatPin | protected |
_pinMode | SerialWombatUART | protected |
_rx7Command | SerialWombatUART | protected |
_rxPin | SerialWombatUART | protected |
_sw | SerialWombatPin | protected |
_tx7Command | SerialWombatUART | protected |
_txPin | SerialWombatUART | protected |
available() | SerialWombatUART | inline |
availableForWrite() | SerialWombatUART | inline |
begin(uint32_t baudRate, uint8_t pin, uint8_t rxPin, uint8_t txPin, uint8_t HWinterface=1) | SerialWombatUART | inline |
digitalRead() | SerialWombatPin | inline |
digitalWrite(uint8_t val) | SerialWombatPin | inline |
disable() | SerialWombatPin | inline |
flush() | SerialWombatUART | inline |
initPacketNoResponse(uint8_t packetNumber, uint8_t param0=0x55, uint8_t param1=0x55, uint8_t param2=0x55, uint8_t param3=0x55, uint8_t param4=0x55) | SerialWombatPin | inline |
initPacketNoResponse(uint8_t packetNumber, uint16_t param0=0x55, uint8_t param1=0x55, uint8_t param2=0x55, uint8_t param3=0x55) | SerialWombatPin | inline |
initPacketNoResponse(uint8_t packetNumber, uint16_t param0, uint16_t param1, uint8_t param2=0x55) | SerialWombatPin | inline |
peek() | SerialWombatUART | inline |
pin() | SerialWombatPin | inline |
pinMode(uint8_t mode, bool pullDown=false, bool openDrain=false) | SerialWombatPin | inline |
read() | SerialWombatUART | inline |
readBytes(char *buffer, size_t length) | SerialWombatUART | inline |
readPublicData() | SerialWombatPin | inline |
SerialWombatPin(SerialWombatChip &serialWombatChip) | SerialWombatPin | inline |
SerialWombatPin(SerialWombatChip &serialWombatChip, uint8_t pin) | SerialWombatPin | inline |
SerialWombatUART(SerialWombatChip &serialWombat) | SerialWombatUART | inline |
setTimeout(long timeout_mS) | SerialWombatUART | inline |
swPinModeNumber() | SerialWombatPin | inline |
timeout | SerialWombatUART | protected |
write(uint8_t data) | SerialWombatUART | inline |
write(const uint8_t *buffer, size_t size) | SerialWombatUART | inline |
writePublicData(uint16_t value) | SerialWombatPin | inline |